Description
A trailer mounted pressure washer allows you to offer additional services and functionality that you do not have with a standard unit. The portable pressure washer trailer allows you to take your pressure washing equipment directly to your job-site, regardless of how remote it might be. It is a completely self-contained package with a water tank and trailer mounted pressure washer.
Commercial Trailer Mounted Pressure Washer Features & Options:
Powder Coated Steel Frame:
The frame is constructed with a heavy-gauge steel structural tube spine for extra rigidity.
Suspension:
Torflex axles deliver up to 300% more wheel travel than leaf spring axles to create a smooth ride over rough terrain. This adds to the life of your pressure washer and reduces fatigue on your tow vehicle. T300EE, T400EE, T500EE pressure washer trailers have electric brakes on both axles to comply with commercial use D.O.T.
Tank:
Choose from pressure washer trailers with 200 gallons up to 540 gallons of water storage. Hydro Tek’s exclusive seamless polyethylene supply tanks with hold down straps provide secure water storage. Dual tanks on the 400 and 540 gallon trailer provide baffling to reduce water sloshing and also allows for the water tank to be split to carry two different types of fluid. Pump Seal Saver Bypass installed on most commercial trailer mount pressure washers to recirculate cool water from the bulk tank into your pressure washer pump.
Lights/Wiring:
Tail lights are water tight sealed and recessed for added protection from road hazards. All wiring is routed through the trailer spine to eliminate damage from road hazards. Electric brake pressure washer trailers have a brake controller ready 7-prong plug.
Storage:
The integrated storage tube for spray wands and large (47”x22”x10”) storage box at the rear of the portable trailer offers ample area to store wands, hoses and other accessories. Additional storage options available.
Coupler/Chains/Jack:
Save time every time you hook up the trailer to your tow vehicle with an oversized wheel that allows for easy movement of the trailer. All trailer mounted pressure washers include safety chains and a wheeled jack that quickly swings up and out of the way.
Water Filter/Valves/Hoses:
High capacity water filter with 1½” water drain valve supplies clean water to the pump to increase pump life. Complete plumbing and hoses, sized properly to your Hydro Tek commercial pressure washer, are included. Hoses are routed through grommets in the trailer frame to protect from chaffing and road hazards. High water tank shutoff included.
Customize your commercial trailer pressure washer with your choice of accessories:
3-way ball valve, Stainless hose reels, Light bar, Bucket/chemical rack, Chrome wheels, sand hopper, chemical tank, Custom trailer color, alternate hitch choices, additional storage options, Hydro Vacuum wastewater filtration systems.
Skid Features:
Rugged “Pro-tect-it” Frame:
Hydro Tek’s unique “Pro-tect-it” frame of 1¼”, heavy gauge steel, with durable electrostatically applied powder coat finish.
Stainless Steel Panels:
These rugged and durable panels offer lifetime rust and corrosion resistance and protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come.
Simple to Use Controls:
Lighted rocker switch, thermostat and other controls are located on an easy to reach recessed panel to prevent damage.
Industrial Engines:
Efficient OHV, twin-cylinder gas engines with electric key start, oil filter, low oil shutdown, and cast iron cylinder for maximum duty and performance. Some models equipped with a durable diesel engine for enhanced longevity and efficient operation. Note: the GX390 Honda is a single cylinder engine.
Fuel Tanks:
Heavy Duty “roto-molded” rust free fuel tanks with fuel filter to protect against contaminated fuel. Safely refill fuel tanks away from hot engine. Extended run time (up to 8hrs.) eliminates interruptions. Note: the GX390 Honda has an integrated fuel tank.
Frame Mounted Unloader:
The unloader is frame mounted eliminating heat failures and vibration. Low flow models have pressure activated unloaders for consistent and dependable operation. Higher flow models have flow activated unloaders which allow pressure to build up gradually as trigger gun is activated eliminating “pressure spikes” and improving operator control and safety. When the gun is released, entire system pressure is relieved enhancing life of washer and eliminating engine starting problems.
SpiraLast™ Coil:
The coil is a Hydro Tek manufactured SpiraLast™ heating coil. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps.
Flexible, high intensity 12V Diesel Burner System:
Sophisticated 12V burner system transforms available power from system to fire the diesel burner. This efficient burner system, with PowerLight ignitor, provides maximum burner performance. No outside power source is required.
Belt Drive or Direct Drive Pump:
These industrial triplex, ceramic plunger pumps are run at lower RPM to give maximum efficiency and longevity outperforming the competition. Pumps are located front and center for easy access. Belt drive models have the EZ Align™ belt tensioning system to allow for easy, single bolt, belt tensioning adjustments.
Skid Specifications (other options available)
S35006HG:
Mobile Wash Skid; Steam / Hot / Cold Water –Self Contained: Diesel Heated, Gas Engine, 12v Burner. The SS Series is a power washer that uses the 12–volt charging system on the engine to power the diesel–fired burner giving you continuous hot water. The SS Series has the output to perform heavy duty cleaning without needing any outside electrical power. Simply turn the key for high pressure, hot cleaning strength. An invaluable piece of equipment for property management companies, farmers, mechanics or anyone requiring a mobile cleaning solution for dirt, grease, and grime.
PRESSURE: 3500 PSI
FLOW CAPACITY: 5.5 GPM
OUTLET TEMP: Adjustable to 250°F
POWER/ENGINE: 688ccHonda–electric key start
ENGINE FUEL/CAP: Unleaded, 8gal
CONTROLS/SWITCHES:Adjustable thermostat, lighted control switch
PUMP: General Pump
POWER DRIVE: V–Belt Drive with EZ Align™ pump rail, stainless belt guard
PRESSURE CONTROL: Unloader valve, Industrial fittings, Safety burst disc, Pressure relief valve
WATER SUPPLY: Pressure feed from garden hose with convenient frame mounted fitting, (float tank avail.)
BURNER COIL: Spiralast™ robotically fused ½” sch. 80 steel pipe, cold rolled 4 spiral, ceramic insulation
BURNER/POWER: Oil fired, 12V, 20amp fuse protected, auto ignition, inline fuel filter
BURNER FUEL/CAP: Diesel fuel, kerosene, or fuel oil, 8gallons–546,000Btu input
CONSTRUCTION:Rugged, powder coated Pro–Tect–It™ frame, stainless panels, coil wrap, and double–wall coil end caps
