Easy to apply
Keeps natural appearance
Protects the substrate by deeply penetrating
Use Gator Skin on any porous material that needs protections for the elements such as:
Before You Begin: Surfaces must be clean, dry and free of any contaminants before sealing. Gator Skin Repellent performance is directly related to how thoroughly the surfaced is prepared. All grease, oil and potential contaminates must be removed. Do not apply when the temperature of the air or the surface to be coated is below 50°F. Testing on your surface is always recommended to ensure desired results.
Surface Preparation: Concrete should cure a mini-mum of 28 days before sealing. Read label instructions carefully. Cobble Clean, Cobble Prep and Cobble Oxhide may be used for specific cleaning situations.
Mixing Instructions: Stir product
Application: Apply with a lambs wool or microfiber cloth, working the material into the surface.
Airless Sprayer: Spray by overlapping each pass. Always apply in an even film deposit and maintain a working wet line. Remove any excess material after 3-5 minutes.
On Bare Surface: Apply to the surface and allow to penetrate for 3-5 minutes, remove any excess. Do not allow any excess or pooling to dry on the surface.
Over Previously Sealed: Film forming sealers will need to be stripped prior to application. Gator Skin Repel-lent may be applied over non film forming sealers provided the prior application is sufficiently worn away.